Probability of survival and stress distribution of narrow diameter implants with different implant-abutment taper angles.

This study evaluated the probability of survival, failure mode, and stress distribution of narrow diameter implants (NDIs) with internal implant-abutment conical connection comprised of different taper angles and thread designs. Sixty-three NDIs (Ø 3.5 × 8.5 mm) were divided according to the taper angle (TA), internal diameter (ID), and trapezoidal thread design (TD) (n = 21/group), as follows: (a) 11.5°U (11.5° TA; ID: 2.5 mm; TD: dual threaded); (b) 11.5°S (11.5° TA; ID: 2.5 mm; TD: single threaded); (c) 16°S (16° TA; ID: 2.72 mm; TD: single threaded). They were subjected to step-stress accelerated life testing. The reliability and use-level probability Weibull curves were calculated at 50, 100, and 150 N for a mission of 100,000 cycles and the failure mode was analyzed using a scanning electron microscope. For finite element analysis the von-Mises stress (σvM ) was calculated for the abutment and implant. All groups showed high reliability (above 84%) and failures occurred predominantly in the abutment. In the FEA, 11.5°U showed higher σvM for the implant. All NDIs showed high reliability at clinically challenging loads. The system with greater taper angle showed lower σVm in the implant, and dual threaded implants showed a higher stress concentration in the implant and cortical bone.

Immediate vs conventional loading of Facility-Equator system in mandibular overdenture wearers: 1-year RCT with clinical, biological, and functional evaluation.

BACKGROUND: The use of immediate loading (IML) is still poorly explored in elderly patients and implant-retained mandibular overdenture (IMO) wearers. For this reason, more comparisons to conventional loading (CL) are required. PURPOSE: To evaluate the clinical, biological, functional, and oral health-related quality of life (OHRQOL) influence of CL and IML loading on elders wearing IMO retained by the Facility-Equator system up to 1 year after implant installation. MATERIAL AND METHODS: Twenty edentulous patients received two narrow diameter implants in the mandible; the loading type (CL or IML) was randomized. The clinical parameters were monitored along with prosthetic events, marginal bone loss (MBL) and bone level change (BLC), implant stability quotients (ISQ), masticatory performance outcomes, and Interleukin 1 beta (IL-1ß) and tumor necrosis factor alpha (TNF-α) levels in the peri-implant crevicular fluid during the first year of loading. The OHRQoL was assessed via the Oral Health Impact Profile-EDENT questionnaire. Data were analyzed by the Mann-Whitney, χ2 , Wilcoxon paired, and McNemar tests. RESULTS: After 1 year, MBL, BLC and ISQ were statistically identical (P > .05) in the CL and IML groups. The probing depth at 12 months in the CL group (2.19 mm) was higher than in the IML group (1.29 mm; P ≤ .0001). TNF-α was 33.6% higher in the CL group at 6 months (P = .043), while IL-1ß was significantly higher in the IML group up to 6 months. The survival rate was 90% in the CL group and 85% in the IML group; 33 prosthetic events occurred in CL group and 23 in IML group. CONCLUSIONS: After 12 months, both loading protocols are viable and result in similar clinical, biological, functional, and OHRQOL outcomes. However, IML generates better adaptation of the peri-implant tissues, faster improvement in OHRQoL and fewer prosthetic intercurrences than CL.

Comparison between inflammation-related markers in peri-implant crevicular fluid and clinical parameters during osseointegration in edentulous jaws.

OBJECTIVES: The aim of this study is to improve the understanding of interleukin mechanisms during osseointegration to enhance the monitoring of implant failure and success. Clinical parameters, implant stability, and cytokine levels in peri-implant crevicular fluid (PICF) during early bone healing after implant placement were investigated. MATERIAL AND METHODS: Sixty narrow implants were placed in mandible anterior region of 30 edentulous patients (67.23 ± 7.66 years). Bone type, insertion torque, and primary stability were registered during surgery. Clinical measurements of peri-implant health and the secondary implant stability quotient (ISQ) were recorded. Samples from the PICF were collected 1, 2, 4, 8, and 12 weeks after surgery and analyzed for IL-1ß, IL-6, IL-10, and TNF-α levels using ELISAs. RESULTS: The gingival index increased significantly during the first week (p = 0.05), while the plaque index increased significantly between 4 to 8 and 8 to 12 weeks (p < 0.05). The probing depth and the ISQ also reduced significantly (p < 0.05) over time. The TNF-α release increased significantly after the 2nd week for non-atrophic patients and 4th week for atrophic patients (p < 0.05). The IL-1ß concentrations showed a short-lived peak after 1st week (p = 0.003), specially in atrophic patients and sites with bone type I (p = 0.034; p = 0.007). The IL-6 concentrations peaked during the 1st and 2nd weeks (p < 0.05; p = 0.005) in atrophic patients and in bone type II (p = 0.023; p = 0.003). The IL-10 concentrations increased gradually over time, showing the highest concentrations at the 12th week (p < 0.005). A total of 12 implants failed at different periods. CONCLUSION: While the clinical measurements presented differences between the evaluation periods, these were not indicative of early dental implant failure or peri-implant diseases. Smoking, bone atrophy, and bone type can greatly influence the cytokines concentrations during the healing time.